 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
HM
Gunboat William Construction
Nelsons Navy
Page 3 of 12 
| HM
Gunboat William 1795 (1:32): |
Model designed entirely in-house by Rich, Dave and John.
HM Gunboat William (1:32) as fitted in 1795. Her armament includes 2 x 12pdr
carronades (aft) and 1 x 24pdr cannon (fore) mounted on a bearing race of
cannon balls.
 |
Second planking completed and the triangular section at the transom in-filled. |
 |
Wale fitted, note that the wale bottom plank is thicker than the wale top plank. Wale has been painted using Admiralty Paints Dull Black. |
 |
Lower deck forward platform planked and the stores bulkhead and hatch fitted. |
 |
Stores hatch hinges fitted. This shot also shows the inner bulwark planked and a white wash applied using Admiralty Paints Dull White. |
 |
Scuttle lids planked. |
 |
Lower deck with scuttle openings lined ready to accept the scuttle lids. |
 |
Starboard scuttles temporarily fitted. |
 |
Detail shot of the foremost scuttle, note that the forward edge of the coaming overhangs the forward edge of the deck by 1.5mm. |
Model designed entirely in-house by Rich, Dave and John.
If you have any ideas/suggestions, either for this kit or future kits
you'd like to see developed why not let us know by emailing us at: suggestions@jotika-ltd.com
To receive notification of updates to this web site email us at:
webupdate@jotika-ltd.com
| Page 2 |
Page 4 |
