JoTiKa Ltd. ~ HMS Surprise Construction Page 14.

HMS Surprise

Nelsons Navy

Page 14 of 17

Model designed entirely in-house by Rich, Dave and John.

HMS Surprise (1:64)

	Quarterdeck inner bulwark detail with authentic belaying pins, cleats and kevels.

	One of the 18pdr carronades on the quarterdeck. All of the carronades on the model a fully rigged with breach rope and gun tackles.
	The quarterdeck capstan. This 'half' of the capstan is mounted directly over the upper deck capstan.
	Quarterdeck detailing including ships wheel assembly, mizzen sheet bitts and companionway. Ships wheel is shown prior to rigging the tiller ropes.
	The all new authentic turned brass ship's wheel. It should be noted that the overall size of this wheel, from spoke tip to spoke tip is 24mm (approx. 1 inch). The assembly is made up of 10 turned brass spokes which are inserted through the pre-drilled brass outer wheel rim and into the pre-drilled brass wheel hub. Finally the brass etched relief and rivet detail is added.


	The complete double ships wheel assembly.

Model designed entirely in-house by Rich, Dave and John.

If you have any ideas/suggestions, either for this kit or future kits you'd like to see developed why not let us know by emailing us at: suggestions@jotika-ltd.com

To receive notification of updates to this web site email us at:
webupdate@jotika-ltd.com

Page 13

1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 9 : 10 : 11 : 12 :

13 : 14 : 15 : 16 : 17

Page 15

TOP