Quick build for the beginner, a challenge to detail for the expert. The Ocean Going Tug is designed for heavy weather being very stable but also manoeuvrable. Additional detail can be added by using 1:72 scale fittings.
Kit includes: 70 formings; detailed hull; fore and aft decks; bridge wings; anchor winch; superstructure; detailed lifeboats and davits; modeling knife; cement; motor; shaft; coupling; brass rudder.

This Anchor Handling / Tug / Oil Rig Supply vessel is a very popular kit allowing you to make four different classes of vessel, simply by rearranging the superstructure and funnels. A very attractive boat can be made by the addition of some commercial fittings.
Kit includes: detailed hull moulding in high impact styrene; two types of funnels; fixed kort nozzle; rudder; knife; styrene cement; wire; screws; motor mount; full instructions.

ThunderFlash has been designed for you to enter the exciting sport of fast electric powerboat racing. With its low cost and short building time we have designed the ThunderFlash to utilise readily available equipment as found in buggies and electric cars.
Formed in high impact styrene the kit contains deck and hull mouldings in high impact styrene, motor mount, servo tray, ni-cad tray, rudder support, brass rudder, propshaft and propeller, (decals not included).

Designed for 2 channel Radio Control and using 4 1200mah. nicads the prototype ran for over an hour. With the addition of scale fittings the frigate can be turned into a very attractive model.

Deep Dive VI is designed to be an inexpensive introduction to the world of model submarines. Once the formings are cut out, only eight gluing operations are needed as the rest is simply bolted together. All the workings are in the bottom of the hull so access is no problem. Using the 385 motor provided with 6 x 1200ma cells, the Deep Dive VI will run for up to 40 minutes. Designed for 2 channel Radio Control operation, using a micro-switch. (Movable bow planes, rudder and forward power on the micro-switch) Front vane control is used to achieve stable and constant depth keeping. With multi-channel Radio Control, full forward and reverse operation can be achieved.
Kit includes: hull formings in Research Yellow high impact styrene; quick access radio box; rudder; dive vanes; servo trays; 385 motor; propshaft; motor coupling; brass and stainless wire; all nuts and bolts; full instructions.